CareTouch Pulse Oximeter

CareTouch Pulse Oximeter

CareTouch pulse oximeter accurately measures the pulse rates and oxygen levels at the same time. Suitable for individuals with diabetes, Care Touch pulse oximeter features a compact and light weight design equipped with a low battery indicator. CareTouch finger pulse oximeter is simple to use, making the monitoring of the pulse rate very easy.

CareTouch finger pulse oximeter is a new non-invasive medical device that uses a sensor to check oxygen saturation. The rate is measured by sending wavelengths of light in the fingertip.

Pulse oximeters are widely used in medical clinics, hospitals and homes to monitor the oxygen saturation level and pulse rate, both of which are vital signs of health. Care Touch pulse oximeter can help you track these vital signs so you can stay on top of your diabetes.

Includes

• 1 CareTouch Pulse Oximeter
• 2 AAA batteries
• Instructions

Features

The Care Touch pulse oximeter has the following features

• Blood oxygen saturation level
• Measure pulse rate
• Low battery indicator
• Automatic power off
• LED display
• Fast results, as fast as 10 seconds
• Light and compact design
• Easy and convenient to operate and carry
• Low power consumption 

How to use

Step 1. Press the button to open the probe then insert finger

Step 2. Press the operating button to activate the CareTouch pulse oximeter

Step 3. Results within 10 seconds

Measurement Principle

Operation principal of the instrument (Photoelectric Oxyhemoglobin Inspection Technology) is adopted in accordance with Capacity Pulse Scanning and Recoding Technology, so that two beams of different wavelength of light (660nm glow and 490nm near infrared light) can be focused onto the human nail tip through a perspective clamp finger-type sensor. The measured signal can be obtained by a photosensitive element. Information acquired through which will be shown on two groups of LEDs through process in electronic circuits and microprocessor.

Maintenance and Storage of Your EasyTest Finger Pulse Oximeter

• Clean surface of the fingertip oximeter before it is used in diagnostic.
• Remove batteries inside the battery cassette if the oximeter will not be operated for a long time.
• It is best to preserve your EasyTest Pulse Oximeter in a place where ambient temperatures are -4 to 131 F and humidity is 10 to 80%.
• It is recommended that the product should be kept in a dry environment anytime. A wet environment might affect its lifetime and might damage your Easy Test Pulse Oximeter.
• Please follow local laws when disposing of used batteries.

Vendor Information